How to Make a Wood Bottle Opener/Cap Catcher
A wooden bottle opener and cap catcher comes in handy when entertaining friends and family. It also makes for a nice wall decoration in any kitchen.
You don’t have to be a woodworking expert to make your own bottle opener. Do-it-yourself projects like this one are easier than many people realize.
- one hammer or brad nailer
- A hand, table, miter or circular saw
Note: It is up to you which type of saw to use, but the miter may be the most efficient for the job. If you already have a table saw it can easily be used for this purpose.
If you are a beginner, you may want to refrain from using a hand or circular saw, as each requires you to be able to make very precise movements. Next, choose the driving nails and drill you want to use. Learn more about cordless drills at woodworkboss.com
We’re using a Ryobi ONE+ lithium-ion drill. Ryobi is Today’s Homeowner’s preferred line of power tools.
Building Materials You’ll Need:
- a bottle opener
- wood glue
- a board measuring 1″ by 6″
- finish nails 11/4″ in length
- wood stain or paint
You may also choose to use copper trim, but this is an aesthetic choice.
Cutting the Wood
You will need cuts of wood that measure 1″ x 6″ x 8.” This will serve as the bottle opener’s cap catcher.
For the sides and front, you will need three 1″ x 6″ x 2.5″ pieces of wood.
The back panel will require a 1″ x 6″ x 12″ piece of wood.
Every cut that you need for this project begins with 1″ x 6″ to make it easier.
Let’s Get to Work!
The first step is to make every cut necessary to complete the project. Once you have done so, attach the sides of the project to the front piece of wood. Use a flat surface.
Glue and then nail the pieces of wood together. Take the back piece of wood and connect it with the sides of the project. Apply your wood glue (we prefer Titebond) and hammer in four nails, with two going on each side.
Attach the bottom of the bottle opener and cap catcher with the same method you used to attach the back to the sides. Each side of your opener should have three nails hammered into it.
Once you have built the bottle opener’s wood housing, you will want to paint it. Paint or wood stain can be used, depending on your preference. After completing this step, leave it alone until it has completely dried.
Now comes the attachment of the bottle opener to the wood. Find the center of the backboard and use a pencil to mark it with a line. Center the bottle opener and then screw it in firmly.
Optional: Add copper trim to make the piece really stand out!
Enjoy The Final Product!
You now have a usable wooden bottle opener. This can be a great gift for family, friends or neighbors.
Putting your own spin on it will make it an even more appreciated gift when you give it to someone you love.